Dust Free Hardwood Floor Refinishing & Cleaning
Did you know:
The Bridgepoint System is completely dust-free. You will not be cleaning up our dust months later as is the case with the sanding process.
The Bridgepoint System is odorless, non toxic and dries in about an hour. You can walk on the floor in your stockings at that time. Furniture may be moved back in 4 hours and rugs after 12 hours. Don't allow shoes on the floor for the first 24 hours. After that, your new finish is hardened and ready for normal use.
Step 1 - Visual Inspection
We will join you in the inspection to be sure that we have found all damaged areas. Another purpose of the inspection is to determine if we can restore the appearance level with the Bridgepoint System or if a more aggressive restoration will be required, including sanding, staining and refinishing.
Step 2 - Damage Repair
We will fill in the cracks, gouges and separations with Bridgepoint Wood Patch. If we don't have exactly the right color our technicians will mix colors to match.
Step 3 - Complete Cleaning and Abrasion
This step will remove all loose and embedded soil. It will take off scuff marks and, through mild abrasion, will remove the surface layer of the old finish. This leaves your floor in the ideal condition for the next finish to be applied. This entire process is dust free.
Step 4 - Initial Sealer Coat of Finish
Step 5 - Final Finish Coat
Your have your choice of semi-gloss or matte (satin) finish.
You now have a beautiful, durable finish that will protect, beautify and add years to the life of your hardwood floors.
The same process can be used to refinish other fine hardwood furnishings. Cabinets, tables and desks can be restored to a new look and protected from damage. A little preventative maintenance will help keep those expensive pieces in top condition for life.
to see why we are sure your carpets will be cleaner when we use the Patented